Build Your Own Baseball Card Display Case
Baseball card collecting is a favorite hobby for many Americans. It’s a way to relive childhood memories, honor favorite players, and even make a profit. However, storing and displaying your baseball card collection can be a challenge. That’s where a baseball card display case comes in handy. Here’s how you can build one on your own.
Materials Needed
The following materials are needed for this project:
- Wooden Planks - 6 pieces of 1x4x8 pine
- Glass or Plexiglass Sheets - 2 pieces of 12x16
- Nails
- Hammer
- Saw
- Paint or Stain (optional)
Step-by-Step Guide
Follow these steps to build your own baseball card display case:
Step 1: Cut the Wood
Cut the wooden planks into the following lengths:
- 2 pieces of 12 inches
- 2 pieces of 16 inches
- 2 pieces of 11 ¼ inches
- 2 pieces of 15 ¼ inches
- 2 pieces of 11 inches
- 2 pieces of 15 inches
Step 2: Assemble the Frame
Using the 12-inch and 16-inch pieces, assemble the frame for the baseball card display case. The 12-inch pieces should be nailed to the ends of the 16-inch pieces to form a rectangle.
Step 3: Add the Shelves
Using the 11 ¼ inch and 15 ¼ inch pieces, add two shelves to the frame. Nail the shelves into place on opposite sides of the frame.
Step 4: Add the Back Panel
Using the 11-inch and 15-inch pieces, add the back panel to the frame. Nail the back panel into place on the opposite side of the shelves.
Step 5: Add the Front Panel
Using two pieces of glass or plexiglass sheets, create a front panel for the display case. Nail the glass or plexiglass into place on the front of the frame.
Step 6: Paint or Stain (optional)
If desired, paint or stain the wooden display case to match your home decor.
Conclusion
Building your own baseball card display case is a fun and rewarding project. With just a few materials and some basic tools, you can create a unique and personalized way to display your prized baseball card collection.